3pp-mirror/ahoy
1
0
Fork 0
mirror of https://github.com/lumapu/ahoy.git synced 2025-04-29 10:16:21 +02:00
Code Issues Projects Releases Packages Wiki Activity

update docs wrt to SPI pins

Browse source
This commit is contained in:
Markus Krause 2023-03-27 12:00:27 +02:00
parent 5018009f4a
commit 1413fa13c5
2 changed files with 12 additions and 1 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

10
Getting_Started.md
View file

@ -178,6 +178,16 @@ CE D2 (GPIO4)
IRQ D0 (GPIO16 - no IRQ!)
```
ATTENTION: From development version 108 onwards, also MISO, MOSI and SCLK
are configurable. Their defaults are correct for 'standard' ESP32 boards
and non-settable for ESP8266 (as this chip cannot move them elsewhere).
If you have an existing install though, you might see '0' in the web GUI.
Set MISO=19, MOSI=23, SCLK=18 in GUI and save for existing installs, this is the old
correct default for most ESP32 boards, for ESP82xx, a simple settings save should suffice.
Reboot afterwards.
## Flash the Firmware on your Ahoy DTU Hardware
Once your Hardware is ready to run, you need to flash the Ahoy DTU Firmware to your Board.

3
src/CHANGES.md
View file

@ -3,7 +3,8 @@
(starting from release version `0.5.66`)
## 0.5.108
* merge: PR SPI pins configureable (ESP32) #807, #806
* merge: PR SPI pins configureable (ESP32) #807, #806 (requires manual set of MISO=19, MOSI=23, SCLK=18 in GUI for existing installs)
* merge: PR MI serial outputs #809
* fix: no MQTT `total` sensor for autodiscover if only one inverter was found #805
* fix: MQTT `total` renamed to `device_name` + `_TOTOL` for better visibility #805