mirror of
https://github.com/lumapu/ahoy.git
synced 2025-08-03 08:28:20 +02:00
lumapu
GitHub
commit
1160672e29
18 changed files with 697 additions and 33 deletions
69
.github/ISSUE_TEMPLATE/report-ahoy.md
vendored
Normal file
69
.github/ISSUE_TEMPLATE/report-ahoy.md
vendored
Normal file
|
|
@ -0,0 +1,69 @@
|
|||
---
|
||||
name: Report Ahoy
|
||||
about: question about Ahoy
|
||||
title: ''
|
||||
labels: ''
|
||||
assignees: ''
|
||||
|
||||
---
|
||||
|
||||
## Hardware
|
||||
* [ ] ESP8266
|
||||
* [ ] ESP32
|
||||
* [ ] Raspberry Pi
|
||||
|
||||
Modelname: ______
|
||||
Retailer URL: ______
|
||||
|
||||
### nRF24L01+ Module
|
||||
* [ ] nRF24L01+ you verified this is a **Plus model** capable of the required 256kBit/s mode
|
||||
* [ ] **square dot** indicates original Nordic Semicon chip
|
||||
* [ ] **round dot** indicates copy-cat / counterfeit SI labs chip
|
||||
|
||||
### Antenna:
|
||||
* [ ] circuit board
|
||||
* [ ] external antenna
|
||||
|
||||
### Power Stabilization:
|
||||
* [ ] 100uF Electrolytic Capacitor
|
||||
connected between +3.3V and GND (Pin 1 & 2) of the NRF Module
|
||||
* [ ] Voltage stabilizing motherboard
|
||||
|
||||
### Connection diagram:
|
||||
* [ ] Image of the your wiring attached
|
||||
|
||||
### Connection diagram I used:
|
||||
| nRF24L01+ Pin | ESP8266/32 GPIO |
|
||||
| ------------- | --------------- |
|
||||
| Pin 1 GND [] | GND |
|
||||
| Pin 2 +3.3V | +3.3V |
|
||||
| Pin 3 CE | GPIO_2/_4 CE |
|
||||
| Pin 4 CSN | GPIO15/_5 CS |
|
||||
| Pin 5 SCK | GPIO14/18 SCLK |
|
||||
| Pin 6 MOSI | GPIO13/23 MOSI |
|
||||
| Pin 7 MISO | GPIO12/19 MISO |
|
||||
| Pin 8 IRQ | GPIO_0/0 IRQ |
|
||||
|
||||
Note: [] GND Pin 1 has a square mark on the nRF24L01+ module
|
||||
|
||||
## Software
|
||||
* [ ] AhoyDTU
|
||||
* [ ] OpenDTU
|
||||
|
||||
### Version / Git SHA:
|
||||
Version: _._.__
|
||||
Github Hash: _______
|
||||
|
||||
### Build & Flash Method:
|
||||
* [ ] Arduino
|
||||
* [ ] ESP Tools
|
||||
* [ ] Platform IO
|
||||
|
||||
### Desktop OS:
|
||||
* [ ] Linux
|
||||
* [ ] Windows
|
||||
* [ ] Mac OS
|
||||
|
||||
### Debugging:
|
||||
* [ ] USB Serial Log (attached)
|
||||
* [ ] Setup settings (use our templates ... to be added)
|
||||
155
.github/ISSUE_TEMPLATE/report.yaml
vendored
Normal file
155
.github/ISSUE_TEMPLATE/report.yaml
vendored
Normal file
|
|
@ -0,0 +1,155 @@
|
|||
name: "AhoyDTU bug"
|
||||
description: "File a bug report"
|
||||
title: "[ESP8266/ESP32/RaspberryPi] Problem Description / Beschreibung"
|
||||
labels: ["bug", "needs-triage"]
|
||||
assignees:
|
||||
- stefan123t
|
||||
body:
|
||||
- type: markdown
|
||||
attributes:
|
||||
value: |
|
||||
Bitte die Posting Guide lines lesen, Vorlage kopieren und ausfüllen und in Eurem Support Forum Eintrag posten.
|
||||
Wir lesen auch gerne Deutsch, bitte fülle die u.a. Fragen aus damit wir Dir bestmöglich helfen können Danke!
|
||||
|
||||
Please read, copy & fill in the template from our Posting Guide lines into your Support Forum post.
|
||||
We do enjoy the english language, but we need a couple of things to best support you in your goal, please fill in all / most of the details given below. Thanks!
|
||||
- type: markdown
|
||||
attributes:
|
||||
value: "## Hardware"
|
||||
- type: dropdown
|
||||
id: platform
|
||||
attributes:
|
||||
label: Platform
|
||||
description: Which Hardware are you using to run AhoyDTU on ?
|
||||
options:
|
||||
- ESP8266
|
||||
- ESP32
|
||||
- RaspberryPi
|
||||
validations:
|
||||
required: true
|
||||
- type: input
|
||||
id: model
|
||||
attributes:
|
||||
label: Model name
|
||||
description: Please give us a precise description of your hardware and/or a link to the vendor
|
||||
placeholder:
|
||||
validations:
|
||||
required: false
|
||||
- type: dropdown
|
||||
id: nrf24l01-module
|
||||
attributes:
|
||||
label: nRF24L01+ Module
|
||||
description: |
|
||||
What type of nRF24L01+ chip is on your nRF24L01+ module ?
|
||||
* you verified this is a **nRF24L01+ plus** model capable of the required 256kBit/s mode ?
|
||||
* **square dot** indicates original Nordic Semicon chip ?
|
||||
* **round dot** indicates copy-cat / counterfeit SI labs chip
|
||||
multiple: true
|
||||
options:
|
||||
- nRF24L01+ plus
|
||||
- square dot
|
||||
- round dot
|
||||
- type: dropdown
|
||||
id: antenna
|
||||
attributes:
|
||||
label: Antenna
|
||||
description: What type of antenna has your nRF24L01+ module ?
|
||||
options:
|
||||
- circuit board
|
||||
- external antenna
|
||||
validations:
|
||||
required: true
|
||||
- type: dropdown
|
||||
id: power-stabilization
|
||||
attributes:
|
||||
label: Power Stabilization
|
||||
description: |
|
||||
What kind of voltage / power stabilization have you used for your nRF24L01+ module ?
|
||||
* **~100uF Elko** (Electrolytic Capacitor) connected between +3.3V and GND (Pin 1 & 2) of the nRF24L01+ Module
|
||||
* special **voltage stabilizing board**
|
||||
* **nothing** (yet)
|
||||
options:
|
||||
- ~100uF Elko
|
||||
- board
|
||||
- nothing
|
||||
validations:
|
||||
required: true
|
||||
- type: textarea
|
||||
id: connection-diagram
|
||||
attributes:
|
||||
label: Connection diagram
|
||||
description: Tell us which connection diagram you used?
|
||||
value: |
|
||||
## Connection diagram I used:
|
||||
| nRF24L01+ Pin | ESP8266/32 GPIO |
|
||||
| ------------- | --------------- |
|
||||
| Pin 1 GND [] | GND |
|
||||
| Pin 2 +3.3V | +3.3V |
|
||||
| Pin 3 CE | GPIO_2/_4 CE |
|
||||
| Pin 4 CSN | GPIO15/_5 CS |
|
||||
| Pin 5 SCK | GPIO14/18 SCLK |
|
||||
| Pin 6 MOSI | GPIO13/23 MOSI |
|
||||
| Pin 7 MISO | GPIO12/19 MISO |
|
||||
| Pin 8 IRQ | GPIO_0/0 IRQ |
|
||||
|
||||
Note: [] GND Pin 1 has a square mark on the nRF24L01+ module
|
||||
validations:
|
||||
required: true
|
||||
- type: checkboxes
|
||||
id: connection-picture
|
||||
attributes:
|
||||
label: Connection picture
|
||||
description:
|
||||
options:
|
||||
- label: I will attach/upload an Image of my wiring
|
||||
validations:
|
||||
required: true
|
||||
- type: markdown
|
||||
attributes:
|
||||
value: "## Software"
|
||||
- type: input
|
||||
id: software-version
|
||||
attributes:
|
||||
label: Version
|
||||
description: What version of our software are you running ?
|
||||
placeholder: 0.5.17
|
||||
validations:
|
||||
required: true
|
||||
- type: input
|
||||
id: software-githash
|
||||
attributes:
|
||||
label: Github Hash
|
||||
description: Which GitHub hash has the build of our software ?
|
||||
placeholder: 5402e9b
|
||||
validations:
|
||||
required: true
|
||||
- type: dropdown
|
||||
id: build-and-flash-method
|
||||
attributes:
|
||||
label: Build & Flash Method
|
||||
description: What software do you use to flash / build & flash our firmware images ?
|
||||
options:
|
||||
- ESP Tools (flash)
|
||||
- Platform IO (build & flash)
|
||||
validations:
|
||||
required: true
|
||||
- type: dropdown
|
||||
id: desktop-os
|
||||
attributes:
|
||||
label: Desktop
|
||||
description: Which operating system are you using on your desktop to build & flash ?
|
||||
options:
|
||||
- Linux
|
||||
- Mac OS
|
||||
- Windows
|
||||
validations:
|
||||
required: true
|
||||
- type: textarea
|
||||
id: debugging
|
||||
attributes:
|
||||
label: Debug Serial Log output
|
||||
description: Please copy and paste any relevant log output. This will be automatically formatted into code, so no need for backticks.
|
||||
placeholder: |
|
||||
- USB Serial Log (attached)
|
||||
- Setup settings (use our templates ... to be added)
|
||||
render: shell
|
||||
7
.github/workflows/compile_esp8266.yml
vendored
7
.github/workflows/compile_esp8266.yml
vendored
|
|
@ -3,8 +3,11 @@ name: Ahoy Release for ESP8266
|
|||
on:
|
||||
push:
|
||||
branches: main
|
||||
paths-ignore:
|
||||
- '**.md' # Do no build on *.md changes
|
||||
paths:
|
||||
- 'tools/esp8266/**' # build only when changes occur here
|
||||
- '!tools/esp8266/README.md'
|
||||
- '!tools/esp8266/CHANGES.md'
|
||||
- '!tools/esp8266/User_Manual.md'
|
||||
jobs:
|
||||
build:
|
||||
runs-on: ubuntu-latest
|
||||
|
|
|
|||
|
|
@ -229,6 +229,7 @@ Gather user inverter information here to understand what differs between some in
|
|||
| isdor | HM-300 | | 1.0.14 | 2021 | 12-09 | 102 | | |
|
||||
| aschiffler | HM-1500 | | 1.0.12 | 2020 | 06-24 | 100 | | |
|
||||
| klahus1 | HM-300 | | 1.0.10 | 2020 | 07-07 | 102 | | |
|
||||
| roku133 | HM-400 | | 1.0.10 | 2020 | 07-07 | 102 | | |
|
||||
| eeprom23 | HM-1200 | 0.1.0 | 1.0.18 | 2021 | 12-24 | 269619201 | 18:21:00 | HWRev 256 |
|
||||
| eeprom23 | HM-1200 2t | 0.1.0 | 1.0.16 | 2021 | 10-12 | 269619207 | 17:06:00 | HWRev 256 |
|
||||
| fila612 | HM-700 | | 1.0.10 | 2021 | 11-01 | 104 | | |
|
||||
|
|
@ -239,6 +240,7 @@ Gather user inverter information here to understand what differs between some in
|
|||
| lumapu | HM-1200 | 0.1.0 | 1.0.12 | 2020 | 06-24 | | | |
|
||||
| chehrlic | HM-600 | | 1.0.10 | 2021 | 11-01 | 104 | | |
|
||||
| chehrlic | TSOL-M800de | | 1.0.10 | 2021 | 11-01 | 104 | | |
|
||||
| B5r1oJ0A9G | HM-800 | | 1.0.10 | 2021 | | 104 | | |
|
||||
| | | | | | | | | |
|
||||
| | | | | | | | | |
|
||||
|
||||
|
|
|
|||
|
|
@ -828,8 +828,10 @@ void app::setupMqtt(void) {
|
|||
|
||||
if(mMqttActive) {
|
||||
mMqtt.sendMsg("version", mVersion);
|
||||
if(mMqtt.isConnected())
|
||||
if(mMqtt.isConnected()) {
|
||||
mMqtt.sendMsg("device", mSysConfig.deviceName);
|
||||
mMqtt.sendMsg("uptime", "0");
|
||||
}
|
||||
|
||||
/*char topic[30];
|
||||
for(uint8_t i = 0; i < MAX_NUM_INVERTERS; i ++) {
|
||||
|
|
|
|||
|
|
@ -92,11 +92,15 @@ class mqtt {
|
|||
// da ein MQTT_CONNECTION_LOST -3 die Werte zerstört hat.
|
||||
mClient->setServer(mCfg->broker, mCfg->port);
|
||||
mClient->setBufferSize(MQTT_MAX_PACKET_SIZE);
|
||||
|
||||
char lwt[MQTT_TOPIC_LEN + 7 ]; // "/uptime" --> + 7 byte
|
||||
snprintf(lwt, MQTT_TOPIC_LEN + 7, "%s/uptime", mCfg->topic);
|
||||
|
||||
if((strlen(mCfg->user) > 0) && (strlen(mCfg->pwd) > 0))
|
||||
resub = mClient->connect(mDevName, mCfg->user, mCfg->pwd);
|
||||
resub = mClient->connect(mDevName, mCfg->user, mCfg->pwd, lwt, 0, false, "offline");
|
||||
else
|
||||
resub = mClient->connect(mDevName);
|
||||
// ein Subscribe ist nur nach einem connect notwendig
|
||||
resub = mClient->connect(mDevName, lwt, 0, false, "offline");
|
||||
// ein Subscribe ist nur nach einem connect notwendig
|
||||
if(resub) {
|
||||
char topic[MQTT_TOPIC_LEN + 13 ]; // "/devcontrol/#" --> + 6 byte
|
||||
// ToDo: "/devcontrol/#" is hardcoded
|
||||
|
|
|
|||
BIN
tools/homeassistant/HomeAssistantDashboardAhoy.png
Normal file
BIN
tools/homeassistant/HomeAssistantDashboardAhoy.png
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 72 KiB |
|
|
@ -6,4 +6,7 @@ in manual.yaml you will find the setup for manual configuration, adapt your name
|
|||
|
||||
in autodiscovery.yaml you will find the setup for automatic discovery of the inverter
|
||||
|
||||
in dashboard.yaml you will find the raw configuration of a dashboard:
|
||||
|
||||
|
||||
Note: the config might need adaption to your system (mqtt, homeassistant etc)
|
||||
|
|
|
|||
99
tools/homeassistant/dashboard.yaml
Normal file
99
tools/homeassistant/dashboard.yaml
Normal file
|
|
@ -0,0 +1,99 @@
|
|||
views:
|
||||
- title: Home
|
||||
cards:
|
||||
- type: horizontal-stack
|
||||
cards:
|
||||
- type: gauge
|
||||
entity: sensor.inverter_ac_power
|
||||
name: Inverter
|
||||
max: 800
|
||||
needle: false
|
||||
severity:
|
||||
green: 500
|
||||
yellow: 100
|
||||
red: 0
|
||||
- type: gauge
|
||||
entity: sensor.inverter_channel_1_ac_power
|
||||
name: Channel 1
|
||||
max: 460
|
||||
- type: gauge
|
||||
entity: sensor.inverter_channel_2_ac_power
|
||||
name: Channel 2
|
||||
max: 460
|
||||
- show_name: false
|
||||
show_icon: true
|
||||
show_state: true
|
||||
type: glance
|
||||
entities:
|
||||
- entity: sensor.inverter_ac_voltage
|
||||
name: Voltage
|
||||
- entity: sensor.inverter_frequency
|
||||
name: Frequency
|
||||
- entity: sensor.inverter_ac_current
|
||||
name: Current
|
||||
- entity: sensor.inverter_ac_power
|
||||
name: Power
|
||||
- entity: sensor.inverter_dc_power
|
||||
name: DC Power
|
||||
- entity: sensor.inverter_ac_reactive_power
|
||||
name: Reactive Power
|
||||
- entity: sensor.inverter_power_factor
|
||||
- entity: sensor.inverter_day_yield
|
||||
name: Day Yield
|
||||
- entity: sensor.inverter_total_yield
|
||||
name: Total Yield
|
||||
- entity: sensor.inverter_efficiency
|
||||
name: Efficiency
|
||||
- entity: sensor.inverter_temperature
|
||||
name: Temperature
|
||||
- entity: sensor.inverter_uptime
|
||||
name: Uptime
|
||||
- entity: sensor.inverter_last_alarm
|
||||
name: Status
|
||||
- entity: sensor.inverter_power_limit
|
||||
- entity: sensor.inverter_firmware_version
|
||||
- entity: sensor.inverter_firmware_build_year
|
||||
- entity: sensor.inverter_firmware_build_month_and_day
|
||||
- entity: sensor.inverter_hardware_id
|
||||
title: Inverter
|
||||
columns: 4
|
||||
- type: horizontal-stack
|
||||
cards:
|
||||
- show_name: false
|
||||
show_icon: true
|
||||
show_state: true
|
||||
type: glance
|
||||
entities:
|
||||
- entity: sensor.inverter_channel_1_ac_voltage
|
||||
name: Voltage
|
||||
- entity: sensor.inverter_channel_1_ac_current
|
||||
name: Current
|
||||
- entity: sensor.inverter_channel_1_ac_power
|
||||
name: Power
|
||||
- entity: sensor.inverter_channel_1_day_yield
|
||||
name: Day Yield
|
||||
- entity: sensor.inverter_channel_1_total_yield
|
||||
name: Total Yield
|
||||
- entity: sensor.inverter_channel_1_irradiation
|
||||
name: Irradiation
|
||||
title: Channel 1
|
||||
columns: 2
|
||||
- show_name: false
|
||||
show_icon: true
|
||||
show_state: true
|
||||
type: glance
|
||||
entities:
|
||||
- entity: sensor.inverter_channel_2_ac_voltage
|
||||
name: Voltage
|
||||
- entity: sensor.inverter_channel_2_ac_current
|
||||
name: Current
|
||||
- entity: sensor.inverter_channel_2_ac_power
|
||||
name: Power
|
||||
- entity: sensor.inverter_channel_2_day_yield
|
||||
name: Day Yield
|
||||
- entity: sensor.inverter_channel_2_total_yield
|
||||
name: Total Yield
|
||||
- entity: sensor.inverter_channel_2_irradiation
|
||||
name: Irradiation
|
||||
title: Channel 2
|
||||
columns: 2
|
||||
|
|
@ -1,23 +1,318 @@
|
|||
sensor:
|
||||
- platform: mqtt
|
||||
state_topic: "inverter/Terrasse/ch0/P_AC"
|
||||
name: "Aktuelle Produktion HM-600"
|
||||
device_class: energy
|
||||
unit_of_measurement: "Watt"
|
||||
value_template: >
|
||||
{{value|round(2)}}
|
||||
state_class: total_increasing
|
||||
unique_id: "current_hm600"
|
||||
last_reset_topic: "inverter/Terrasse/ch0/P_AC"
|
||||
last_reset_value_template: "1970-01-01T00:00:00+00:00"
|
||||
- platform: mqtt
|
||||
state_topic: "inverter/Terrasse/ch0/YieldTotal"
|
||||
name: "Gesamtproduktion HM-600"
|
||||
device_class: energy
|
||||
unit_of_measurement: "KW/H"
|
||||
value_template: >
|
||||
{{value|round(2)}}
|
||||
state_class: total_increasing
|
||||
unique_id: "total_hm600"
|
||||
last_reset_topic: "inverter/Terrasse/ch0/YieldTotal"
|
||||
last_reset_value_template: "1970-01-01T00:00:00+00:00"
|
||||
mqtt:
|
||||
sensor:
|
||||
- state_topic: "inverter/uptime"
|
||||
icon: mdi:clock-start
|
||||
name: "Inverter Uptime"
|
||||
unique_id: "ahoy_ch0_uptime"
|
||||
value_template: >
|
||||
{% set time = value|int %}
|
||||
{% set minutes = ((time % 3600) / 60) | int %}
|
||||
{% set hours = ((time % 86400) / 3600) | int %}
|
||||
{% set days = (time / 86400) | int %}
|
||||
{%- if time < 60 -%}
|
||||
Less than a minute
|
||||
{%- else -%}
|
||||
{%- if days > 0 -%}
|
||||
{%- if days == 1 -%}
|
||||
1 day
|
||||
{%- else -%}
|
||||
{{ days }} days
|
||||
{%- endif -%}
|
||||
{%- endif -%}
|
||||
{%- if hours > 0 -%}
|
||||
{%- if days > 0 -%}
|
||||
{{ ', ' }}
|
||||
{%- endif -%}
|
||||
{%- if hours == 1 -%}
|
||||
1 hour
|
||||
{%- else -%}
|
||||
{{ hours }} hours
|
||||
{%- endif -%}
|
||||
{%- endif -%}
|
||||
{%- if minutes > 0 -%}
|
||||
{%- if days > 0 or hours > 0 -%}
|
||||
{{ ', ' }}
|
||||
{%- endif -%}
|
||||
{%- if minutes == 1 -%}
|
||||
1 minute
|
||||
{%- else -%}
|
||||
{{ minutes }} minutes
|
||||
{%- endif -%}
|
||||
{%- endif -%}
|
||||
{%- endif -%}
|
||||
|
||||
- state_topic: "inverter/GardenShed/ch0/Efficiency"
|
||||
icon: "mdi:trending-up"
|
||||
name: "Inverter Efficiency"
|
||||
unique_id: "ahoy_ch0_efficiency"
|
||||
unit_of_measurement: "%"
|
||||
- state_topic: "inverter/GardenShed/ch0/P_DC"
|
||||
device_class: "power"
|
||||
name: "Inverter DC Power"
|
||||
unique_id: "ahoy_ch0_p_dc"
|
||||
unit_of_measurement: "W"
|
||||
value_template: >
|
||||
{{value|round(3)}}
|
||||
- state_topic: "inverter/GardenShed/ch0/YieldTotal"
|
||||
device_class: "energy"
|
||||
icon: "mdi:lightning-bolt-outline"
|
||||
name: "Inverter Total Yield"
|
||||
unique_id: "ahoy_ch0_yield_total"
|
||||
unit_of_measurement: "kWh"
|
||||
value_template: >
|
||||
{{value|round(3)}}
|
||||
- state_topic: "inverter/GardenShed/ch0/YieldDay"
|
||||
device_class: "energy"
|
||||
name: "Inverter Day Yield"
|
||||
unique_id: "ahoy_ch0_yield_day"
|
||||
unit_of_measurement: "Wh"
|
||||
value_template: >
|
||||
{{value|round(3)}}
|
||||
- state_topic: "inverter/GardenShed/ch0/ALARM_MES_ID"
|
||||
name: "Inverter Alarm Message ID"
|
||||
unique_id: "ahoy_ch0_alarm_mes_id"
|
||||
value_template: >
|
||||
{{value|round(3)}}
|
||||
- state_topic: "inverter/GardenShed/ch0/LastAlarmCode"
|
||||
icon: "mdi:message-alert"
|
||||
name: "Inverter Last Alarm"
|
||||
unique_id: "ahoy_ch0_last_alarm"
|
||||
value_template: >
|
||||
{% set value = value|round(0) %}
|
||||
{% set mapper = {
|
||||
0: "Nothing",
|
||||
1: 'Inverter start',
|
||||
2: 'DTU command failed',
|
||||
121: 'Over temperature protection',
|
||||
125: 'Grid configuration parameter error',
|
||||
126: 'Software error code 126',
|
||||
127: 'Firmware error',
|
||||
128: 'Software error code 128',
|
||||
129: 'Software error code 129',
|
||||
130: 'Offline',
|
||||
141: 'Grid overvoltage',
|
||||
142: 'Average grid overvoltage',
|
||||
143: 'Grid undervoltage',
|
||||
144: 'Grid overfrequency',
|
||||
145: 'Grid underfrequency',
|
||||
146: 'Rapid grid frequency change',
|
||||
147: 'Power grid outage',
|
||||
148: 'Grid disconnection',
|
||||
149: 'Island detected',
|
||||
205: 'Input port 1 & 2 overvoltage',
|
||||
206: 'Input port 3 & 4 overvoltage',
|
||||
207: 'Input port 1 & 2 undervoltage',
|
||||
208: 'Input port 3 & 4 undervoltage',
|
||||
209: 'Port 1 no input',
|
||||
210: 'Port 2 no input',
|
||||
211: 'Port 3 no input',
|
||||
212: 'Port 4 no input',
|
||||
213: 'PV-1 & PV-2 abnormal wiring',
|
||||
214: 'PV-3 & PV-4 abnormal wiring',
|
||||
215: 'PV-1 Input overvoltage',
|
||||
216: 'PV-1 Input undervoltage',
|
||||
217: 'PV-2 Input overvoltage',
|
||||
218: 'PV-2 Input undervoltage',
|
||||
219: 'PV-3 Input overvoltage',
|
||||
220: 'PV-3 Input undervoltage',
|
||||
221: 'PV-4 Input overvoltage',
|
||||
222: 'PV-4 Input undervoltage',
|
||||
301: 'Hardware error code 301',
|
||||
302: 'Hardware error code 302',
|
||||
303: 'Hardware error code 303',
|
||||
304: 'Hardware error code 304',
|
||||
305: 'Hardware error code 305',
|
||||
306: 'Hardware error code 306',
|
||||
307: 'Hardware error code 307',
|
||||
308: 'Hardware error code 308',
|
||||
309: 'Hardware error code 309',
|
||||
310: 'Hardware error code 310',
|
||||
311: 'Hardware error code 311',
|
||||
312: 'Hardware error code 312',
|
||||
313: 'Hardware error code 313',
|
||||
314: 'Hardware error code 314',
|
||||
5041: 'Error code-04 Port 1',
|
||||
5042: 'Error code-04 Port 2',
|
||||
5043: 'Error code-04 Port 3',
|
||||
5044: 'Error code-04 Port 4',
|
||||
5051: 'PV Input 1 Overvoltage/Undervoltage',
|
||||
5052: 'PV Input 2 Overvoltage/Undervoltage',
|
||||
5053: 'PV Input 3 Overvoltage/Undervoltage',
|
||||
5054: 'PV Input 4 Overvoltage/Undervoltage',
|
||||
5060: 'Abnormal bias',
|
||||
5070: 'Over temperature protection',
|
||||
5080: 'Grid Overvoltage/Undervoltage',
|
||||
5090: 'Grid Overfrequency/Underfrequency',
|
||||
5100: 'Island detected',
|
||||
5120: 'EEPROM reading and writing error',
|
||||
5150: '10 min value grid overvoltage',
|
||||
5200: 'Firmware error',
|
||||
8310: 'Shut down',
|
||||
9000: 'Microinverter is suspected of being stolen' } %}
|
||||
{{ mapper[value] if value in mapper else "value is unknon" }}
|
||||
- state_topic: "inverter/GardenShed/ch0/Temp"
|
||||
device_class: "temperature"
|
||||
name: "Inverter Temperature"
|
||||
unique_id: "ahoy_ch0_temp"
|
||||
unit_of_measurement: "°C"
|
||||
value_template: >
|
||||
{{value|round(3)}}
|
||||
- state_topic: "inverter/GardenShed/ch0/Freq"
|
||||
device_class: "frequency"
|
||||
name: "Inverter Frequency"
|
||||
unique_id: "ahoy_ch0_freq"
|
||||
unit_of_measurement: "Hz"
|
||||
value_template: >
|
||||
{{value|round(3)}}
|
||||
- state_topic: "inverter/GardenShed/ch0/P_ACr"
|
||||
device_class: "power"
|
||||
name: "Inverter AC Reactive Power"
|
||||
unique_id: "ahoy_ch0_p_acr"
|
||||
unit_of_measurement: "VA"
|
||||
value_template: >
|
||||
{{value|round(3)}}
|
||||
- state_topic: "inverter/GardenShed/ch0/P_AC"
|
||||
device_class: "power"
|
||||
name: "Inverter AC Power"
|
||||
unique_id: "ahoy_ch0_p_ac"
|
||||
unit_of_measurement: "W"
|
||||
value_template: >
|
||||
{{value|round(3)}}
|
||||
- state_topic: "inverter/GardenShed/ch0/I_AC"
|
||||
device_class: "current"
|
||||
name: "Inverter AC Current"
|
||||
unique_id: "ahoy_ch0_i_ac"
|
||||
unit_of_measurement: "A"
|
||||
value_template: >
|
||||
{{value|round(3)}}
|
||||
- state_topic: "inverter/GardenShed/ch0/U_AC"
|
||||
device_class: "voltage"
|
||||
icon: "mdi:current-ac"
|
||||
name: "Inverter AC Voltage"
|
||||
unique_id: "ahoy_ch0_u_ac"
|
||||
unit_of_measurement: "V"
|
||||
value_template: >
|
||||
{{value|round(3)}}
|
||||
- state_topic: "inverter/GardenShed/ch0/Pct"
|
||||
device_class: "power_factor"
|
||||
name: "Inverter Power Factor"
|
||||
unique_id: "ahoy_ch0_pct"
|
||||
- state_topic: "inverter/GardenShed/ch0/FWVersion"
|
||||
icon: "mdi:numeric"
|
||||
name: "Inverter Firmware Version"
|
||||
unique_id: "ahoy_ch0_fw_version"
|
||||
value_template: >
|
||||
{{ value | round(0) | regex_replace('([0-9]+)([0-9]{2})([0-9]{2})$', '\\1.\\2.\\3') }}
|
||||
- state_topic: "inverter/GardenShed/ch0/FWBuildYear"
|
||||
icon: "mdi:calendar-blank"
|
||||
name: "Inverter Firmware build year"
|
||||
unique_id: "ahoy_ch0_fw_builid_year"
|
||||
value_template: >
|
||||
{{value|round(0)}}
|
||||
- state_topic: "inverter/GardenShed/ch0/FWBuildMonthDay"
|
||||
icon: "mdi:calendar-clock"
|
||||
name: "Inverter Firmware build month and day"
|
||||
unique_id: "ahoy_ch0_fw_builid_month_day"
|
||||
- state_topic: "inverter/GardenShed/ch0/HWPartId"
|
||||
icon: "mdi:identifier"
|
||||
name: "Inverter Hardware ID"
|
||||
unique_id: "ahoy_ch0_hw_part_id"
|
||||
value_template: >
|
||||
{{value|round(0)}}
|
||||
- state_topic: "inverter/GardenShed/ch0/PowerLimit"
|
||||
icon: "mdi:speedometer"
|
||||
name: "Inverter Power Limit"
|
||||
unique_id: "ahoy_ch0_power_limit"
|
||||
unit_of_measurement: "%"
|
||||
value_template: >
|
||||
{{value|round(0)}}
|
||||
- state_topic: "inverter/GardenShed/ch1/Irradiation"
|
||||
icon: "mdi:weather-partly-cloudy"
|
||||
name: "Inverter Channel 1 Irradiation"
|
||||
unique_id: "ahoy_ch1_irradiation"
|
||||
unit_of_measurement: "%"
|
||||
value_template: >
|
||||
{{value|round(3)}}
|
||||
- state_topic: "inverter/GardenShed/ch1/YieldTotal"
|
||||
device_class: "energy"
|
||||
icon: "mdi:lightning-bolt-outline"
|
||||
name: "Inverter Channel 1 Total Yield"
|
||||
unique_id: "ahoy_ch1_yield_total"
|
||||
unit_of_measurement: "kWh"
|
||||
value_template: >
|
||||
{{value|round(3)}}
|
||||
- state_topic: "inverter/GardenShed/ch1/YieldDay"
|
||||
device_class: "energy"
|
||||
name: "Inverter Channel 1 Day Yield"
|
||||
unique_id: "ahoy_ch1_yield_day"
|
||||
unit_of_measurement: "Wh"
|
||||
value_template: >
|
||||
{{value|round(3)}}
|
||||
- state_topic: "inverter/GardenShed/ch1/P_DC"
|
||||
device_class: "power"
|
||||
name: "Inverter Channel 1 AC Power"
|
||||
unique_id: "ahoy_ch1_p_dc"
|
||||
unit_of_measurement: "W"
|
||||
value_template: >
|
||||
{{value|round(3)}}
|
||||
- state_topic: "inverter/GardenShed/ch1/I_DC"
|
||||
device_class: "current"
|
||||
icon: "mdi:current-dc"
|
||||
name: "Inverter Channel 1 AC Current"
|
||||
unique_id: "ahoy_ch1_i_dc"
|
||||
unit_of_measurement: "A"
|
||||
value_template: >
|
||||
{{value|round(3)}}
|
||||
- state_topic: "inverter/GardenShed/ch1/U_DC"
|
||||
device_class: "voltage"
|
||||
icon: "mdi:current-dc"
|
||||
name: "Inverter Channel 1 AC Voltage"
|
||||
unique_id: "ahoy_ch1_u_dc"
|
||||
unit_of_measurement: "V"
|
||||
value_template: >
|
||||
{{value|round(3)}}
|
||||
- state_topic: "inverter/GardenShed/ch2/Irradiation"
|
||||
icon: "mdi:weather-partly-cloudy"
|
||||
name: "Inverter Channel 2 Irradiation"
|
||||
unique_id: "ahoy_ch2_irradiation"
|
||||
unit_of_measurement: "%"
|
||||
value_template: >
|
||||
{{value|round(3)}}
|
||||
- state_topic: "inverter/GardenShed/ch2/YieldTotal"
|
||||
device_class: "energy"
|
||||
icon: "mdi:lightning-bolt-outline"
|
||||
name: "Inverter Channel 2 Total Yield"
|
||||
unique_id: "ahoy_ch2_yield_total"
|
||||
unit_of_measurement: "kWh"
|
||||
value_template: >
|
||||
{{value|round(3)}}
|
||||
- state_topic: "inverter/GardenShed/ch2/YieldDay"
|
||||
device_class: "energy"
|
||||
name: "Inverter Channel 2 Day Yield"
|
||||
unique_id: "ahoy_ch2_yield_day"
|
||||
unit_of_measurement: "Wh"
|
||||
value_template: >
|
||||
{{value|round(3)}}
|
||||
- state_topic: "inverter/GardenShed/ch2/P_DC"
|
||||
device_class: "power"
|
||||
name: "Inverter Channel 2 AC Power"
|
||||
unique_id: "ahoy_ch2_p_dc"
|
||||
unit_of_measurement: "W"
|
||||
value_template: >
|
||||
{{value|round(3)}}
|
||||
- state_topic: "inverter/GardenShed/ch2/I_DC"
|
||||
device_class: "current"
|
||||
icon: "mdi:current-dc"
|
||||
name: "Inverter Channel 2 AC Current"
|
||||
unique_id: "ahoy_ch2_i_dc"
|
||||
unit_of_measurement: "A"
|
||||
value_template: >
|
||||
{{value|round(3)}}
|
||||
- state_topic: "inverter/GardenShed/ch2/U_DC"
|
||||
device_class: "voltage"
|
||||
icon: "mdi:current-dc"
|
||||
name: "Inverter Channel 2 AC Voltage"
|
||||
unique_id: "ahoy_ch2_u_dc"
|
||||
unit_of_measurement: "V"
|
||||
value_template: >
|
||||
{{value|round(3)}}
|
||||
|
|
|
|||
BIN
tools/pcb/nRF24L01_ESP_Wemos_D1.T3001
Normal file
BIN
tools/pcb/nRF24L01_ESP_Wemos_D1.T3001
Normal file
Binary file not shown.
BIN
tools/pcb/pcb_1.JPG
Normal file
BIN
tools/pcb/pcb_1.JPG
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 67 KiB |
BIN
tools/pcb/pcb_2.JPG
Normal file
BIN
tools/pcb/pcb_2.JPG
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 64 KiB |
8
tools/pcb/readme.md
Normal file
8
tools/pcb/readme.md
Normal file
|
|
@ -0,0 +1,8 @@
|
|||
# PCB for Wemos D1 + nRF24L01+
|
||||
|
||||
Simple pcb to plug a nRF24L01+ together with a Wemos D1 Mini / Pro. Thos pcb also leads the UART and the I2C outside. It also allows to easily connect D0 / GPIO16 to RST.
|
||||
|
||||
Download Target 3001 schematics [here](nRF24L01_ESP_Wemos_D1.T3001)
|
||||
|
||||
## 3D previev
|
||||
|
||||
|
|
@ -203,7 +203,7 @@ class InverterPacketFragment:
|
|||
|
||||
# check crc8
|
||||
if f_crc8(payload[:-1]) != payload[-1]:
|
||||
raise BufferError('Frame kaputt')
|
||||
raise BufferError('Frame corrupted - crc8 check failed')
|
||||
|
||||
self.ch_rx = ch_rx
|
||||
self.ch_tx = ch_tx
|
||||
|
|
@ -598,6 +598,9 @@ class InverterTransaction:
|
|||
wait = True
|
||||
except TimeoutError:
|
||||
pass
|
||||
except BufferError as e:
|
||||
print(f'Buffer error {e}')
|
||||
pass
|
||||
|
||||
return wait
|
||||
|
||||
|
|
|
|||
|
|
@ -106,8 +106,9 @@ def poll_inverter(inverter, do_init, retries=4):
|
|||
result = decoder.decode()
|
||||
if isinstance(result, hoymiles.decoders.StatusResponse):
|
||||
data = result.__dict__()
|
||||
|
||||
if hoymiles.HOYMILES_DEBUG_LOGGING:
|
||||
print(f'{c_datetime} Decoded: temp={data["temperature"]}', end='')
|
||||
print(f'{c_datetime} Decoded: temp={data["temperature"]}, total={data["energy_total"]/1000:.3f}', end='')
|
||||
if data['powerfactor'] is not None:
|
||||
print(f', pf={data["powerfactor"]}', end='')
|
||||
phase_id = 0
|
||||
|
|
@ -169,6 +170,8 @@ def mqtt_send_status(broker, inverter_ser, data, topic=None):
|
|||
broker.publish(f'{topic}/pf', data['powerfactor'])
|
||||
broker.publish(f'{topic}/frequency', data['frequency'])
|
||||
broker.publish(f'{topic}/temperature', data['temperature'])
|
||||
if data['energy_total'] is not None:
|
||||
broker.publish(f'{topic}/total', data['energy_total']/1000)
|
||||
|
||||
def mqtt_on_command(client, userdata, message):
|
||||
"""
|
||||
|
|
@ -324,3 +327,6 @@ if __name__ == '__main__':
|
|||
|
||||
except KeyboardInterrupt:
|
||||
sys.exit()
|
||||
except Exception as e:
|
||||
print ('Exception catched: %s' % e)
|
||||
raise
|
||||
|
|
|
|||
|
|
@ -169,6 +169,11 @@ class StatusResponse(Response):
|
|||
data['powerfactor'] = self.powerfactor
|
||||
data['event_count'] = self.event_count
|
||||
data['time'] = self.time_rx
|
||||
|
||||
data['energy_total'] = 0.0
|
||||
for string in data['strings']:
|
||||
data['energy_total'] += string['energy_total']
|
||||
|
||||
return data
|
||||
|
||||
class UnknownResponse(Response):
|
||||
|
|
|
|||
|
|
@ -120,6 +120,8 @@ class InfluxOutputPlugin(OutputPluginFactory):
|
|||
data_stack.append(f'{measurement},type=pf value={data["powerfactor"]:f} {ctime}')
|
||||
data_stack.append(f'{measurement},type=frequency value={data["frequency"]:.3f} {ctime}')
|
||||
data_stack.append(f'{measurement},type=temperature value={data["temperature"]:.2f} {ctime}')
|
||||
if data['energy_total'] is not None:
|
||||
data_stack.append(f'{measurement},type=total value={data["energy_total"]/1000:.3f} {ctime}')
|
||||
|
||||
self.api.write(self._bucket, self._org, data_stack)
|
||||
|
||||
|
|
@ -201,6 +203,8 @@ class MqttOutputPlugin(OutputPluginFactory):
|
|||
self.client.publish(f'{topic}/pf', data['powerfactor'])
|
||||
self.client.publish(f'{topic}/frequency', data['frequency'])
|
||||
self.client.publish(f'{topic}/temperature', data['temperature'])
|
||||
if data['energy_total'] is not None:
|
||||
self.client.publish(f'{topic}/total', data['energy_total']/1000)
|
||||
|
||||
try:
|
||||
import requests
|
||||
|
|
@ -256,6 +260,9 @@ class VzInverterOutput:
|
|||
self.try_publish(ts, f'frequency', data['frequency'])
|
||||
self.try_publish(ts, f'temperature', data['temperature'])
|
||||
|
||||
if data['energy_total'] is not None:
|
||||
self.try_publish(ts, f'total', data['energy_total'])
|
||||
|
||||
def try_publish(self, ts, ctype, value):
|
||||
if not ctype in self.channels:
|
||||
return
|
||||
|
|
@ -265,7 +272,7 @@ class VzInverterOutput:
|
|||
r = self.session.get(url)
|
||||
if r.status_code != 200:
|
||||
raise ValueError('Could not send request (%s)' % url)
|
||||
except ConnectionError as e:
|
||||
except requests.exceptions.ConnectionError as e:
|
||||
raise ValueError('Could not send request (%s)' % e)
|
||||
|
||||
class VolkszaehlerOutputPlugin(OutputPluginFactory):
|
||||
|
|
@ -300,4 +307,7 @@ class VolkszaehlerOutputPlugin(OutputPluginFactory):
|
|||
serial = data["inverter_ser"]
|
||||
if serial in self.inverters:
|
||||
output = self.inverters[serial]
|
||||
output.store_status(data, self.session)
|
||||
try:
|
||||
output.store_status(data, self.session)
|
||||
except ValueError as e:
|
||||
print('Could not send data to volkszaehler instance: %s' % e)
|
||||
|
|
|
|||
Loading…
Add table
Add a link
Reference in a new issue