3pp-mirror/ahoy
1
0
Fork 0
mirror of https://github.com/lumapu/ahoy.git synced 2025-06-01 18:21:39 +02:00
Code Issues Projects Releases Packages Wiki Activity

Update Getting_Started.md

Browse source 
Added esptool instructions for linux and esp32
This commit is contained in:
movcmpret 2023-05-14 11:13:11 +02:00 • committed by GitHub
parent dbb352801e
commit 02c54c85f2
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
1 changed files with 8 additions and 0 deletions
Download patch file Download diff file Expand all files Collapse all files

8
Getting_Started.md
View file

@ -217,6 +217,14 @@ Once your Ahoy DTU is running, you can use the Over The Air (OTA) capabilities t
! ATTENTION: If you update from a very low version to the newest, please make sure to wipe all flash data!
#### Flashing on Linux with `esptool.py` (ESP32)
1. install [esptool.py](https://docs.espressif.com/projects/esptool/en/latest/esp32/) if you haven't already.
2. download and extract the latest release bin-file from [ahoy_](https://github.com/grindylow/ahoy/releases)
3. `cd ahoy_v<XXX> && cp *esp32.bin esp32.bin`
4. Perhaps you need to replace `/dev/ttyUSB0` to match your acual device in the following command. Execute it afterwards: `esptool.py --port /dev/ttyUSB0 --chip esp32 --before default_reset --after hard_reset write_flash --flash_mode dout --flash_freq 40m --flash_size detect 0x1000 bootloader.bin 0x8000 partitions.bin 0x10000 esp32.bin`
5. Unplug and replug your device.
6. Open a serial monitor (e.g. Putty) @ 115200 Baud. You should see some messages regarding wifi.
## Connect to your Ahoy DTU
When everything is wired up and the firmware is flashed, it is time to connect to your Ahoy DTU.