Merge branch 'development02' into asyncWeb02

README.md

@@ -20,4 +20,9 @@ There you will find further explanations on how to proceed. (*Note: It is still
 
 If errors occur or you have suggestions for ideas, please feel free to contact us [here](https://github.com/grindylow/ahoy/issues).
 
+## Contact
+We run a Discord Server that can be used to get in touch with the Developers and Users.
+
+https://discord.gg/WzhxEY62mB
+
 **Contributors are always welcome!**

tools/cases/DollaTek_NRF24L01_Case/case.scad

@@ -0,0 +1,283 @@
+$fn=100;
+
+
+
+
+translate([-w/2-10,0,d+bpt+tpt])
+rotate(a=180, v=[0,1,0])
+box_top();
+translate([w/2+10,0,0])
+box_bottom();
+             
+
+//*************************************************//
+//PARAMETERS
+//*************************************************//
+//BOX
+//--------------------------------------------------
+//inner box width + tolerances
+w=90;
+//inner box length + tolerances
+h=30;
+//inner box depth 
+d=35;
+//wall tickness
+wt=3;
+//bottom plate tickness
+bpt=3;
+//top plate tickness
+tpt=3;
+//top cutout depth
+cd=5;
+//top cutout tickness
+cwt=1.5;
+//--------------------------------------------------
+//BOARD MOUNTING HOLES
+//--------------------------------------------------
+//position
+cx=0;
+cy=0;
+//holes size (radius)
+chs_i=1.5;
+chs_o=4;
+//distancer height
+dsth=3;
+//holes distance h
+chd_h=90;
+//holes distance v
+chd_v=90;
+//--------------------------------------------------
+//TOP PART MOUNTING HOLES
+//--------------------------------------------------
+//position
+cx1=0;
+cy1=0;
+//holes size (radius)
+chs_i1=1.6;
+chs_o1=3;
+//holes distance h
+chd_h1=h-2*chs_i1-2;
+//holes distance v
+chd_v1=w-2*chs_i1-2;
+//*************************************************//
+//*************************************************//
+//MODULES
+//*************************************************//
+
+//top box part          
+module box_top()
+{
+        difference()
+        {
+            union()
+            {
+                difference()
+                {
+                    translate([ 0, 0, d+bpt-cd-0.2])     
+                    rounded_cube( w+2*wt, h+2*wt, tpt+cd+0.2, 6);
+                    
+                    translate([ 0, 0,  d+bpt-cd-1])
+                    rounded_cube( w+2*cwt+0.3, h+2*cwt+0.3, cd+1, 4);
+                }
+                /*************************/
+                
+                //add here...
+                
+                /*************************/
+            }
+            //TOP PART HOLES
+            //tph_t_cut();
+            /*************************/
+            
+            //subtract here... 
+            
+            /*************************/ 
+        }
+}
+//bottom box
+module box_bottom()
+{
+    difference()
+    {
+        union()
+        {
+            difference()
+            {
+                rounded_cube( w+2*wt, h+2*wt, d+bpt, 6);
+                
+                translate([ 0, 0, -cd])
+                difference()
+                {
+                    translate([ 0, 0,  d+bpt])
+                    rounded_cube( w+2*wt+1, h+2*wt+1, cd+1, 4);
+
+                    translate([ 0, 0,  d+bpt-1])
+                    rounded_cube( w+2*cwt, h+2*cwt, cd+3, 4);
+                }
+                translate([ 0, 0, bpt])
+                rounded_cube( w, h, d+bpt, 4);
+            }
+            //BOARD DISTANCER
+            //board_distancer();
+            //TOP PLATE DISTANCER
+            //top_distancer();
+            /*************************/
+
+            
+            
+            /*************************/
+        }
+        
+        //BOARD HOLES
+        //bh_cut();
+        //TOP PART HOLES
+        //tph_b_cut();
+        /*************************/
+        
+        //subtract here...
+                    
+            translate([25, 0, 14])
+            rotate([0,90,0])   
+            cylinder(r=3.5,h=40);
+
+            translate([-48, 0, 7])
+            cube( [10, 10, 5], true);
+            
+        /*************************/
+  
+    }
+}
+
+/****************************************************/
+module board_distancer()
+{
+    translate([cx,cy,0])
+    {              
+        translate([+chd_h/2,chd_v/2,0])
+        cylinder(r=chs_o,h=bpt+dsth);
+        translate([-chd_h/2,chd_v/2,0])
+        cylinder(r=chs_o,h=bpt+dsth);
+        translate([+chd_h/2,-chd_v/2,0])
+        cylinder(r=chs_o,h=bpt+dsth);
+        translate([-chd_h/2,-chd_v/2,0])
+        cylinder(r=chs_o,h=bpt+dsth);
+    }
+}
+module top_distancer()
+{
+    translate([cx1,cy1,0])
+    {
+        translate([-chd_v1/2, chd_h1/2, 0])   
+        cylinder(r=chs_o1,h=d+bpt);
+        translate([-chd_v1/2, -chd_h1/2, 0])   
+        cylinder(r=chs_o1,h=d+bpt);
+        translate([chd_v1/2, chd_h1/2, 0])   
+        cylinder(r=chs_o1,h=d+bpt);
+        translate([chd_v1/2, -chd_h1/2, 0])   
+        cylinder(r=chs_o1,h=d+bpt);
+    }
+}
+module bh_cut()
+{
+    translate([cx,cy,0])
+    {  
+        translate([-chd_h/2,-chd_v/2,-1])
+        cylinder(r=chs_i,h=bpt+dsth+2);
+        translate([+chd_h/2,-chd_v/2,-1])
+        cylinder(r=chs_i,h=bpt+dsth+2);
+        translate([-chd_h/2,chd_v/2,-1])
+        cylinder(r=chs_i,h=bpt+dsth+2);
+        translate([+chd_h/2,chd_v/2,-1])
+        cylinder(r=chs_i,h=bpt+dsth+2);
+        
+        translate([-chd_h/2,-chd_v/2,1.3])
+        fhex(5.5,3);
+        translate([+chd_h/2,-chd_v/2,1.3])
+        fhex(5.5,3);
+        translate([-chd_h/2,chd_v/2,1.3])
+        fhex(5.5,3);
+        translate([+chd_h/2,chd_v/2,1.3])
+        fhex(5.5,3);
+    }
+}
+
+module tph_t_cut()
+{
+    translate([cx1,cy1,0])
+    {
+        translate([-chd_v1/2, chd_h1/2, -2])   
+        cylinder(r=chs_i1,h=d+bpt+tpt+3);
+        translate([chd_v1/2, chd_h1/2, -2])   
+        cylinder(r=chs_i1,h=d+bpt+tpt+3);
+    
+        translate([-chd_v1/2, -chd_h1/2, -2])   
+        cylinder(r=chs_i1,h=d+bpt+tpt+3);
+        translate([chd_v1/2, -chd_h1/2, -2])   
+        cylinder(r=chs_i1,h=d+bpt+tpt+3);
+        
+        translate([-chd_v1/2, chd_h1/2, d+bpt+tpt-1.3]) 
+        fhex(5.5,3);
+        
+        translate([chd_v1/2, chd_h1/2, d+bpt+tpt-1.3])  
+        fhex(5.5,3);
+    
+        translate([-chd_v1/2, -chd_h1/2, d+bpt+tpt-1.3])   
+        fhex(5.5,3);
+        
+        translate([chd_v1/2, -chd_h1/2, d+bpt+tpt-1.3])   
+        fhex(5.5,3);
+    
+    }   
+}
+module tph_b_cut()
+{
+    translate([cx1,cy1,0])
+    {
+        translate([-chd_v1/2, chd_h1/2, -2])   
+        cylinder(r=chs_i1,h=d+bpt+3);
+        translate([chd_v1/2, chd_h1/2, -2])   
+        cylinder(r=chs_i1,h=d+bpt+3);
+    
+        translate([-chd_v1/2, -chd_h1/2, -2])   
+        cylinder(r=chs_i1,h=d+bpt+3);
+        translate([chd_v1/2, -chd_h1/2, -2])   
+        cylinder(r=chs_i1,h=d+bpt+3);
+        
+        translate([-chd_v1/2, chd_h1/2, -1]) 
+        cylinder(r=3,h=4);
+        
+        translate([chd_v1/2, chd_h1/2, -1])  
+        cylinder(r=3,h=4);
+    
+        translate([-chd_v1/2, -chd_h1/2, -1])   
+        cylinder(r=3,h=4);
+        
+        translate([chd_v1/2, -chd_h1/2, -1])   
+        cylinder(r=3,h=4); 
+    
+    }   
+}
+
+
+module rounded_cube( x, y, z, r)
+{
+    translate([-x/2+r,-y/2+r,0])
+    linear_extrude(height=z)
+    minkowski() 
+    {
+        square([x-2*r,y-2*r],true);
+        translate([x/2-r,y/2-r,0])
+        circle(r);
+
+    }
+}
+
+module fhex(wid,height)
+{
+    hull()
+    {
+        cube([wid/1.7,wid,height],center = true);
+        rotate([0,0,120])cube([wid/1.7,wid,height],center = true);
+        rotate([0,0,240])cube([wid/1.7,wid,height],center = true);
+    }
+}

tools/esp8266/README.md

@@ -1,9 +1,36 @@
-## OVERVIEW
+## Table of Contents
+
+- [Overview](#overview)
+- [Compile](#compile)
+  * [Optional Configuration before compilation](#optional-configuration-before-compilation)
+- [Flash ESP with Firmware](#flash-esp-with-firmware)
+- [Usage](#usage)
+- [Compatiblity](#compatiblity)
+- [Used Libraries](#used-libraries)
+- [Contact](#contact)
+
+***
+
+## Overview
 
 This page describes how the module of a Wemos D1 mini and ESP8266 is wired to the radio module, flashed and how the further steps are to communicate with the WR HM series.
 
+The NRF24L01+ radio module is connected to the
+standard SPI pins:
+- SCLK (Signal Clock),
+- MISO (Master In Slave Out) and
+- MOSI (Master Out Slave In)
+
+Additional there are 3 pins, which can be set individual:
+- CS (Chip Select),
+- CE (Chip Enable) and
+- IRQ (Interrupt)
+
+These pins can be changed from the /setup URL
+
 #### Compatiblity
 For now the following inverters should work out of the box:
+- HM300
 - HM350
 - HM400
 - HM600
@@ -24,12 +51,23 @@ These pins can be changed in the http://<ip-adress>/setup URL or with a click on
 This code can be compiled using Visual Studio Code and **PlatformIO** Addon. The settings were:
 
 - Board: Generic ESP8266 Module
-- Flash-Size: 1MB (FS: none, OTA: 502kB)
+- Flash-Size: 4MB
 - Install libraries (not included in the Arduino IDE 1.8.19):
   - `Time` 1.6.1
   - `RF24` 1.4.5
   - `PubSubClient` 2.8
   - `ArduinoJson` 6.19.4
+  
+## Used Libraries 
+
+- `ESP8266WiFi` 1.0
+- `DNSServer` 1.1.0
+- `Ticker` 1.0
+- `ESP8266HTTPUpdateServer` 1.0
+- `Time` 1.6.1
+- `RF24` 1.4.5
+- `PubSubClient` 2.8
+- `ArduinoJson` 6.19.4
 
 ### Optional Configuration before compilation
 
@@ -40,7 +78,7 @@ This code can be compiled using Visual Studio Code and **PlatformIO** Addon. The
 Alternativly, instead of modifying `config.h`, `config_override_example.h` can be copied to `config_override.h` and customized.
 config_override.h is excluded from version control and stays local.
 
-## Flash ESP with firmware
+## Flash ESP with Firmware
 
 #### nodemcu-pyflasher (easy way)
 1. download the flash-tool [nodemcu-pyflasher](https://github.com/marcelstoer/nodemcu-pyflasher)
@@ -89,21 +127,23 @@ The serial console will print the converted values which were read out of the in
 
  ## Todo's [See this post](https://github.com/grindylow/ahoy/issues/142)
 
-- [ ]  Wechsel zu AsyncWebServer und ElegantOTA für Stabilität
+- [ ]  Wechsel zu AsyncWebServer und ElegantOTA für Stabilität
 - [x]  klarer Scheduler / Task manager, der ggf. den Receive Task priorisieren kann
-- [x]  Device Info Kommandos (Firmware Version, etc.) über das Dashboard anzeigen [Device Information ( `0x15` `REQ_ARW_DAT_ALL` ) SubCmd Kommandos #145](https://github.com/grindylow/ahoy/issues/145)
+- [x]  Device Info Kommandos (Firmware Version, etc.) über das Dashboard anzeigen [Device Information ( `0x15` `REQ_ARW_DAT_ALL` ) SubCmd Kommandos #145](https://github.com/grindylow/ahoy/issues/145)
 - [ ]  AlarmData & AlarmUpdate Parsen und auf eigener Seite darstellen
-
 ------------------ SWIM LANE ---------------------------
-
+- [ ]  Device Control Kommandos aus dem Setup ermöglichen (TurnOn, TurnOff, Restart, ActivePower Limit, ReactivePower Limit, SetPowerFactor, etc.)
-- HM300
-- [ ]  Device Control Kommandos aus dem Setup ermöglichen (TurnOn, TurnOff, Restart, ActivePower Limit, ReactivePower Limit, SetPowerFactor, etc.)
 - [ ]  Settings exportieren / importieren (API/UI)
 - [ ]  Settings in settings.ini speichern (LittleFS statt EEPROM) [Settings in settings.ini speichern (LittleFS statt EEPROM) #164](https://github.com/grindylow/ahoy/issues/164)
-- [ ]  Homepage aufräumen nur ein Status (aktuell drei AJAX Calls /uptime, /time, /cmdstat)
+- [ ]  Homepage aufräumen nur ein Status (aktuell drei AJAX Calls /uptime, /time, /cmdstat)
-- [ ]  app.cpp aufräumen und in hmRadio / hmProtokollGen3 auslagern
+- [ ]  app.cpp aufräumen und in hmRadio / hmProtokollGen3 auslagern
-- [ ]  MI Wechselrichter unterstützen (miSystem, miInverter, miDefines, miProtokollGen2 etc.)
+- [ ]  MI Wechselrichter unterstützen (miSystem, miInverter, miDefines, miProtokollGen2 etc.)
-- [ ]  nRF24 Interrupt Handling sinnvoll oder warum macht die nRF24 Bibliothek ständig `0x07` Statusabfragen [NRF24 polling trotz aktiviertem IRQ #83](https://github.com/grindylow/ahoy/issues/83)
+- [ ]  nRF24 Interrupt Handling sinnvoll oder warum macht die nRF24 Bibliothek ständig `0x07` Statusabfragen [NRF24 polling trotz aktiviertem IRQ #83](https://github.com/grindylow/ahoy/issues/83)
-- [ ]  Debug Level im Setup änderbar -auch Livedata Visualisierung abschalten ?
+- [ ]  Debug Level im Setup änderbar -auch Livedata Visualisierung abschalten ?
 - [ ]  MQTT Discovery (HomeAssistant) im Setup optional machen
-- [x]  MQTT Subscribe nur beim Reconnect [Das subscribe in der Reconnect Procedure sollte doch nur nach einem conect ausgeführt werden und nicht bei jedem Duchlauf #139](https://github.com/grindylow/ahoy/issues/139)
+- [x]  MQTT Subscribe nur beim Reconnect [Das subscribe in der Reconnect Procedure sollte doch nur nach einem conect ausgeführt werden und nicht bei jedem Duchlauf #139](https://github.com/grindylow/ahoy/issues/139)
+
+## Contact
+We run a Discord Server that can be used to get in touch with the Developers and Users.
+
+https://discord.gg/WzhxEY62mB

tools/esp8266/User_Manual.md

@@ -1,5 +1,5 @@
 # User Manual Ahoy DTU (on ESP8266)
-16.08.2022
+Version #{VERSION}#
 ## Introduction
 See the repository [here](https://github.com/grindylow/ahoy/blob/main/tools/esp8266/README.md)
 

tools/esp8266/html/visualization.html

@@ -4,6 +4,7 @@
         <title>Index - {DEVICE}</title>
         <link rel="stylesheet" type="text/css" href="style.css"/>
         <meta name="viewport" content="width=device-width, initial-scale=1">
+        <meta name="apple-mobile-web-app-capable" content="yes">
         <script type="text/javascript">
             getAjax('/livedata', 'livedata');
             window.setInterval("getAjax('/livedata', 'livedata')", {JS_TS});