[doc] sphinx documentation setup

docs/.gitignore

@@ -0,0 +1,3 @@
+# Sphinx
+build/
+source/generated/

docs/Makefile

@@ -0,0 +1,20 @@
+# Minimal makefile for Sphinx documentation
+#
+
+# You can set these variables from the command line, and also
+# from the environment for the first two.
+SPHINXOPTS    ?=
+SPHINXBUILD   ?= sphinx-build
+SOURCEDIR     = source
+BUILDDIR      = build
+
+# Put it first so that "make" without argument is like "make help".
+help:
+	@$(SPHINXBUILD) -M help "$(SOURCEDIR)" "$(BUILDDIR)" $(SPHINXOPTS) $(O)
+
+.PHONY: help Makefile
+
+# Catch-all target: route all unknown targets to Sphinx using the new
+# "make mode" option.  $(O) is meant as a shortcut for $(SPHINXOPTS).
+%: Makefile
+	@$(SPHINXBUILD) -M $@ "$(SOURCEDIR)" "$(BUILDDIR)" $(SPHINXOPTS) $(O)

docs/README.md

@@ -0,0 +1,18 @@
+# Documentation
+
+We use [Sphinx](https://www.sphinx-doc.org) to generate Meshroom's documentation.
+
+To install all the requirements for building the documentation, simply run: 
+```bash
+pip install sphinx sphinx-rtd-theme myst-parser
+```
+
+> Note: since Sphinx will import the entire `meshroom` package, all requirements for Meshroom must also be installed
+
+To generate the documentation, go to the `docs` folder and run the Sphinx makefile: 
+```bash
+cd meshroom/docs
+make html
+```
+
+To access the documentation, simply go to `meshroom/docs/build/html` and open `index.html` in a browser.

docs/make.bat

@@ -0,0 +1,35 @@
+@ECHO OFF
+
+pushd %~dp0
+
+REM Command file for Sphinx documentation
+
+if "%SPHINXBUILD%" == "" (
+	set SPHINXBUILD=sphinx-build
+)
+set SOURCEDIR=source
+set BUILDDIR=build
+
+%SPHINXBUILD% >NUL 2>NUL
+if errorlevel 9009 (
+	echo.
+	echo.The 'sphinx-build' command was not found. Make sure you have Sphinx
+	echo.installed, then set the SPHINXBUILD environment variable to point
+	echo.to the full path of the 'sphinx-build' executable. Alternatively you
+	echo.may add the Sphinx directory to PATH.
+	echo.
+	echo.If you don't have Sphinx installed, grab it from
+	echo.https://www.sphinx-doc.org/
+	exit /b 1
+)
+
+if "%1" == "" goto help
+
+%SPHINXBUILD% -M %1 %SOURCEDIR% %BUILDDIR% %SPHINXOPTS% %O%
+goto end
+
+:help
+%SPHINXBUILD% -M help %SOURCEDIR% %BUILDDIR% %SPHINXOPTS% %O%
+
+:end
+popd

docs/source/_ext/fetch_md.py

@@ -0,0 +1,65 @@
+import os
+from docutils.nodes import SparseNodeVisitor
+from docutils.parsers.rst import Directive
+from myst_parser.docutils_ import Parser
+from myst_parser.mdit_to_docutils.base import make_document
+
+
+class Relinker(SparseNodeVisitor):
+
+    @staticmethod
+    def get_link_key(node):
+        link_keys = ['uri', 'refuri', 'refname']
+        for key in link_keys:
+            if key in node.attributes.keys():
+                return key
+        return None
+
+    def relink(self, node, base_dir):
+        key = Relinker.get_link_key(node)
+        if key is None:
+            return
+        link = node.attributes[key]
+        if link.startswith('http') or link.startswith('mailto'):
+            return
+        if link.startswith('/'):
+            link = link[1:]
+        node.attributes[key] = base_dir+'/'+link
+
+    def visit_image(self, node):
+        self.relink(node, os.getenv('PROJECT_DIR'))
+
+
+class FetchMd(Directive):
+
+    required_arguments = 2
+
+    def arg_path(self):
+        if self.arguments[0] == ':file:':
+            return self.arguments[1]
+
+    def run(self):
+        path = os.path.abspath(os.getenv('PROJECT_DIR') + '/' + self.arg_path())
+        result = []
+        try:
+            with open(path) as file:
+                parser = Parser()
+                text = file.read()
+                doc = make_document(parser_cls=Parser)
+                parser.parse(text, doc)
+                relinker = Relinker(doc)
+                doc.walk(relinker)
+                result.append(doc[0])
+        except FileNotFoundError:
+            pass
+        return result
+
+
+def setup(app):
+    app.add_directive('fetch_md', FetchMd)
+
+    return {
+        'version': '0.1',
+        'parallel_read_safe': True,
+        'parallel_write_safe': True
+    }

docs/source/_templates/autosummary/module.rst

@@ -0,0 +1,63 @@
+{{ fullname | escape | underline}}
+
+
+.. automodule:: {{ fullname }}
+
+   {% block attributes %}
+   {% if attributes %}
+   .. rubric:: {{ _('Module Attributes') }}
+
+   .. autosummary::
+   {% for item in attributes %}
+      {{ item }}
+   {%- endfor %}
+   {% endif %}
+   {% endblock %}
+
+   {% block functions %}
+   {% if functions %}
+   .. rubric:: {{ _('Functions') }}
+
+   .. autosummary::
+   {% for item in functions %}
+      {{ item }}
+   {%- endfor %}
+   {% endif %}
+   {% endblock %}
+
+   {% block classes %}
+   {% if classes %}
+   .. rubric:: {{ _('Classes') }}
+
+   .. autosummary::
+      :toctree:
+      :recursive:
+   {% for item in classes %}
+      {{ item }}
+   {%- endfor %}
+   {% endif %}
+   {% endblock %}
+
+   {% block exceptions %}
+   {% if exceptions %}
+   .. rubric:: {{ _('Exceptions') }}
+
+   .. autosummary::
+   {% for item in exceptions %}
+      {{ item }}
+   {%- endfor %}
+   {% endif %}
+   {% endblock %}
+
+{% block modules %}
+{% if modules %}
+.. rubric:: Modules
+
+.. autosummary::
+   :toctree:
+   :recursive:
+{% for item in modules %}
+   {{ item }}
+{%- endfor %}
+{% endif %}
+{% endblock %}

docs/source/api.rst

@@ -0,0 +1,9 @@
+Python API Reference
+====================
+
+
+.. autosummary::
+   :recursive:
+   :toctree: generated
+
+   meshroom

docs/source/changes.rst

@@ -0,0 +1,6 @@
+Release Notes
+=============
+
+
+.. fetch_md::
+   :file: CHANGES.md

docs/source/conf.py

@@ -0,0 +1,40 @@
+# Configuration file for the Sphinx documentation builder.
+#
+# For the full list of built-in configuration values, see the documentation:
+# https://www.sphinx-doc.org/en/master/usage/configuration.html
+
+# -- Project information -----------------------------------------------------
+# https://www.sphinx-doc.org/en/master/usage/configuration.html#project-information
+
+import os
+from pathlib import Path
+import sys
+
+os.environ['PROJECT_DIR'] = Path('../..').resolve().as_posix()
+
+sys.path.append(os.path.abspath(os.getenv('PROJECT_DIR')))
+sys.path.append(os.path.abspath('./_ext'))
+
+project = 'Meshroom'
+copyright = '2022, AliceVision Association'
+author = 'AliceVision Association'
+
+# -- General configuration ---------------------------------------------------
+# https://www.sphinx-doc.org/en/master/usage/configuration.html#general-configuration
+
+extensions = [
+    'sphinx.ext.autodoc',
+    'sphinx.ext.autosummary',
+    'fetch_md'
+]
+
+templates_path = ['_templates']
+exclude_patterns = []
+
+
+
+# -- Options for HTML output -------------------------------------------------
+# https://www.sphinx-doc.org/en/master/usage/configuration.html#options-for-html-output
+
+html_theme = 'sphinx_rtd_theme'
+html_static_path = ['_static']

docs/source/index.rst

@@ -0,0 +1,15 @@
+Welcome to meshroom's documentation!
+====================================
+
+
+.. toctree::
+   :maxdepth: 2
+   :caption: Contents:
+
+   api
+   install
+   changes
+
+
+.. fetch_md::
+   :file: README.md

docs/source/install.rst

@@ -0,0 +1,6 @@
+Install
+=======
+
+
+.. fetch_md::
+   :file: INSTALL.md

meshroom/__init__.py

@@ -2,10 +2,10 @@ __version__ = "2021.1.0"
 __version_name__ = __version__
 
 from distutils import util
-from enum import Enum
 import logging
 import os
 import sys
+from .common import init, Backend
 
 # sys.frozen is initialized by cx_Freeze and identifies a release package
 isFrozen = getattr(sys, "frozen", False)
@@ -25,20 +25,7 @@ __version_name__ = os.environ.get("REZ_MESHROOM_VERSION", __version_name__)
 useMultiChunks = util.strtobool(os.environ.get("MESHROOM_USE_MULTI_CHUNKS", "True"))
 
 
-class Backend(Enum):
-    STANDALONE = 1
-    PYSIDE = 2
-
-
-backend = Backend.STANDALONE
-
-
-def useUI():
-    global backend
-    backend = Backend.PYSIDE
-
-
-def setupEnvironment():
+def setupEnvironment(backend=Backend.STANDALONE):
     """
     Setup environment for Meshroom to work in a prebuilt, standalone configuration.
 
@@ -61,6 +48,8 @@ def setupEnvironment():
        COPYING.md  # Meshroom COPYING file
     """
 
+    init(backend)
+
     def addToEnvPath(var, val, index=-1):
         """
         Add paths to the given environment variable.

meshroom/common/__init__.py

@@ -1,4 +1,15 @@
-import meshroom
+"""
+This module provides an abstraction around standard non-gui Qt notions (like Signal/Slot),
+so it can be used in python-only without the dependency to Qt.
+
+Warning: A call to `init(Backend.XXX)` is required to choose the backend before using this module.
+"""
+
+from enum import Enum
+
+class Backend(Enum):
+    STANDALONE = 1
+    PYSIDE = 2
 
 DictModel = None
 ListModel = None
@@ -10,52 +21,14 @@ Variant = None
 VariantList = None
 JSValue = None
 
-if meshroom.backend == meshroom.Backend.PYSIDE:
-    # PySide types
-    from .qt import DictModel, ListModel, Slot, Signal, Property, BaseObject, Variant, VariantList, JSValue
-elif meshroom.backend == meshroom.Backend.STANDALONE:
-    # Core types
-    from .core import DictModel, ListModel, Slot, Signal, Property, BaseObject, Variant, VariantList, JSValue
+def init(backend):
+    global DictModel, ListModel, Slot, Signal, Property, BaseObject, Variant, VariantList, JSValue
+    if backend == Backend.PYSIDE:
+        # PySide types
+        from .qt import DictModel, ListModel, Slot, Signal, Property, BaseObject, Variant, VariantList, JSValue
+    elif backend == Backend.STANDALONE:
+        # Core types
+        from .core import DictModel, ListModel, Slot, Signal, Property, BaseObject, Variant, VariantList, JSValue
 
-
-class _BaseModel:
-    """ Common API for model implementation """
-
-    def __init__(self, keyAttrName="name", **kwargs):
-        """
-        :param keyAttrName: name of the attribute containing the unique key for an object
-        """
-        pass
-
-    @property
-    def objects(self):
-        """ Return a dictionary with {unique_key: object} mapping"""
-        return None
-
-    def get(self, key):
-        """ Get the object with the unique key 'key' """
-        pass
-
-    def add(self, obj):
-        """ Add given object using its 'keyAttrName' as unique key """
-        pass
-
-    def pop(self, key):
-        """ Remove 'item' with unique key 'key' from the model """
-        pass
-
-    def remove(self, obj):
-        """ Remove 'obj' from the model """
-        pass
-
-    def clear(self):
-        """ Remove all internal objects """
-        pass
-
-    def update(self, d):
-        """ Combine dict 'd' with self """
-        pass
-
-    def reset(self, d):
-        """ Reset model with given values """
-        pass
+# default initialization
+init(Backend.STANDALONE)

meshroom/ui/__init__.py

@@ -1,2 +0,0 @@
-import meshroom
-meshroom.useUI()

meshroom/ui/__main__.py

@@ -1,12 +1,11 @@
 import signal
 import sys
 import meshroom
+from meshroom.common import Backend
 
+meshroom.setupEnvironment(backend=Backend.PYSIDE)
 
-if __name__ == "__main__":
-    meshroom.setupEnvironment()
-
-    signal.signal(signal.SIGINT, signal.SIG_DFL)
-    from meshroom.ui.app import MeshroomApp
-    app = MeshroomApp(sys.argv)
-    app.exec_()
+signal.signal(signal.SIGINT, signal.SIG_DFL)
+from meshroom.ui.app import MeshroomApp
+app = MeshroomApp(sys.argv)
+app.exec_()